BG 610 acrylic seam filler
Finishing Products
Grouts & Joint Fillers
Colored acrylic grout for filling seams in walls and floors
For interior and exterior use and wet rooms
For filling normal seams in porcelain, ceramic and stone tiles
Anti-bacterial, water repellant
Properties
- Specific gravity of powder: 1.2 kg. per litre
- Specific gravity when wet: 1.8 kg. per litre
- Application temperature: 5°C - 35°C
- Work usability duration: 60 - 90 min., depending on weather and temperature
- Open time on base: 20 - 30 min., depending on weather and temperature
- Drying time for treading: 3 - 4 hours, depending on weather and temperature
- Drying time: 3 days, depending on weather and temperature
- Powder/water ratio for 2 kg. grout: 0.6 kg. water
- Complies with SI 1661 Part 1 for CG 2WA designation
- Meets requirements of SI 1555
Ingredients
Powder: cement, graded aggregate, polymers and powdered additives
Advantages
- For filling 3 - 10 mm. wide normal seams in porcelain, ceramic marble and mosaic tiles
- For application in residential buildings, commercial and industrial areas, wet rooms, kitchens and sun balconies
- Ready for use after addition of water
Safety Guidelines
- The company's warranty is limited solely to the nature and quality of the products and is no substitute for the user's responsibility; the user is required to check the suitability of the product for the required application.
- We reserve the right to update or modify the data and recommendations without prior notice.
- In any event, this document is not such as to approve or recommend any deviation or aberration from the regulations and laws of the State of Israel, in particular the Planning and Building Law, 5725-1965, and Standards issued by the Standards Institute of Israel.
- Likewise, this document is no substitute for perusal of the aforesaid law and regulations, nor does it constitute a reference for them.