BG 510 primer plaster
Plaster
Cementitious foundation plaster for rigid claddings and plaster systems in normal and marine environments
For interior and exterior use
Suitable for wet rooms and swimming pools
Prevents water ingress
Manual and machine sprayed application
Properties
- Application temperature: 5°C - 35°C
- Specific gravity of powder: 1.6 kg. per litre
- Typical consumption: 1.6 kg. per sq.m. for a thickness of 1 mm.
- Work usability duration: up to an hour
- Capillary absorption coefficient: K < 0.4 kg/ m²h¹ᐟ²
- Controlled shrinkage: no peripheral cracks
- Resistance to water vapour passage: below 1.5
- Flexural strength following 28 days: in excess of 1.5 MPa
- Compressive strength following 28 days: in excess of 8 MPa
- Tensile bond strength following 28 days: in excess of 0.75 MPa
- Holds SI 1920 mark for cementitious plaster in normal and marine environments and as a base for rigid claddings
- Holds Green Standard Label
- Has received verified EPD report
- Meets SI 1414 requirements for thermal plaster system
- Meets SI 5075 requirements for plaster in protected spaces
- Meets SI 2378 requirements for natural stone clad walls
- Meets SI 1555 requirements for mosaic and ceramics for building cladding
Ingredients
Powder: cement, graded aggregate, polymers and powdered additives
Advantages
- For use as a first bridging layer for levelling and thermal plaster systems
- For use as a base for bonding rigid claddings (tiles and stone)
- For use as a base for flexible decorative stucco and finishing plaster
- For use in swimming pool plaster systems
- For application over concrete bases, cellular, concrete, pumice, ceramic and silicate blocks
- For manual application and by spraying with plastering machine
- Suitable for normal and marine environments, interior and exterior use, and wet rooms
- Prevents ingress of vertically flowing water
- Ready for use after addition of water
- Application thickness: 5 - 7 mm.
Safety Guidelines
- The company's warranty is limited solely to the nature and quality of the products and is no substitute for the user's reponsibility; the user is required to check the suitability of the product for the required application.
- We reserve the right to update or modify the data and recommendations without prior notice.
- In any event, this document is not such as to approve or recommend any deviation or aberration from the regulations and laws of the State of Israel, in particular the Planning and Building Law, 5725-1965, and Standards issued by the Standards Institute of Israel.
- Likewise, this document is no substitute for perusal of the aforesaid law and regulations, nor does it constitute a reference for them.