BG GLU acrylic sealant

Waterproofing Solutions

Roof Waterproofing

Flexible, coloured, acrylic paste for sealing roofs

Contributes to the reduction of heat load in the building

Properties

Application temperature: 10°C - 35°C
Temperature resistance: 0°C - 90°C
Proportion of solids: 65%
Specific gravity: 1.2 kg. per litre
Typical consumption: 1 kg. per sq.m. for single layer
Drying time between layers: 6 - 12 hrs. but not exceeding 48 hrs. for application of next layer
Drying time for light treading: 24 hrs.
Final drying time: 7 days
Holds SI 1414 mark for 400 designation
Holds SII Green Label
Meets SI 1045 requirements for thermal insulation
Meets SI 5075 requirements for protected spaces
Meets SI 5282 requirements for green construction

Ingredients

Paste: water, acrylic polymer, special additives

Advantages

For sealing concrete, slate (ridge tile), bituminous sheet, asbestos panel roofs
Withstands different weather conditions and especially suited to Israeli climate
Withstands UV radiation and contributes to the reduction of heat load in the building
Flexible and capable of bridging capillary fissures
High bonding strength to various surfaces
Applied by brushing or spraying
Ready for use

Safety Guidelines

The company's warranty is limited solely to the nature and quality of the products and is no substitute for the user's reponsibility; the user is required to check the suitability of the product for the required application.
We reserve the right to update or modify the data and recommendations without prior notice.
In any event, this document is not such as to approve or recommend any deviation or aberration from the regulations and laws of the State of Israel, in particular the Planning and Building Law, 5725-1965, and Standards issued by the Standards Institute of Israel.
Likewise, this document is no substitute for perusal of the aforesaid law and regulations, nor does it constitute a reference for them.