BG Roof+ acrylic sealant
Waterproofing Solutions
Roof Waterproofing
Reinforced acrylic paste for sealing and whitewashing roofs
Suitable for concrete, slates, tar, bituminous sheets and asbestos
Withstands UV radiation and contributes to the reduction of heat load in the building
For whitewashing roofs
Ready for use
Properties
- Application temperature: 10°C - 35°C
- Temperature resistance: 0°C - 90°C
- Proportion of solids: 57%
- Specific gravity: 1.4 kg. per litre
- Typical consumption: 1.5-2 kg. per sq.m. for single layer
- Drying time between layers: 6 - 12 hrs. but not exceeding 48 hrs. for application of next layer
- Drying time for light treading: 24 hrs.
- Final drying time: 7 days
Ingredients
Paste: water, acrylic polymer, special additives and fibres
Advantages
- For sealing and whitewashing concrete, bituminous sheet, asbestos panel roofs
- Withstands different weather conditions and especially suited to Israeli climate
- Contains fibres for strengthening
- Withstands UV radiation and contributes to the reduction of heat load in the building
- High bonding strength to various surfaces
- Applied by brushing
- Ready for use
Safety Guidelines
- The company's warranty is limited solely to the nature and quality of the products and is no substitute for the user's reponsibility; the user is required to check the suitability of the product for the required application.
- We reserve the right to update or modify the data and recommendations without prior notice.
- In any event, this document is not such as to approve or recommend any deviation or aberration from the regulations and laws of the State of Israel, in particular the Planning and Building Law, 5725-1965, and Standards issued by the Standards Institute of Israel.
- Likewise, this document is no substitute for perusal of the aforesaid law and regulations, nor does it constitute a reference for them.