BG 535 polymeric plaster
Plaster
Plaster and multi-purpose cementitious adhesive for panels
For interior and exterior use
For bonding and plastering polystyrene (styrofoam) boards
For plastering gypsum boards
Manual and machine sprayed application
Properties
- Application temperature: 5°C - 35°C
- Typical consumption: 1.3 kg. per sq.m. for a thickness of 1 mm.
- Work usability duration: up to an hour
- Free shrinkage: below 0.5 mm./m.
- Controlled shrinkage: no peripheral cracks
- Capillary absorption coefficient: K < 0.4 kg/ m²h¹ᐟ²
- Flexural strength following 28 days: in excess of 2 MPa
- Compressive strength following 28 days: in excess of 8 MPa
- Tensile bond strength following 28 days: in excess of 0.75 MPa
- Meets SI 1920 requirements for cementitious plaster
Ingredients
Powder: cement, graded aggregate, polymers and powdered additives
Advantages
- For bonding polystyrene (styrofoam) and mineral wool boards to concrete bases and blocks and cementitious plaster
- For use as a levelling plaster layer before acryllic stucco on polystyrene boards
- For use as a plaster layer on special gypsum boards
- For interior and exterior application
- Application thickness - 3-6 mm.
- Ready for use after addition of water
Safety Guidelines
- The company's warranty is limited solely to the nature and quality of the products and is no substitute for the user's responsibility; the user is required to check the suitability of the product for the required application.
- We reserve the right to update or modify the data and recommendations without prior notice.
- In any event, this document is not such as to approve or recommend any deviation or aberration from the regulations and laws of the State of Israel, in particular the Planning and Building Law, 5725-1965, and Standards issued by the Standards Institute of Israel.
- Likewise, this document is no substitute for perusal of the aforesaid law and regulations, nor does it constitute a reference for them.