BG 505 stucco finishing plaster

Plaster

Top layer finishing plaster for smoothing cementitious bases

BG 505 stucco finishing plaster Image
For interior and exterior use
For interior and exterior use

For interior and exterior use

Smooth finishing layer ready for paint
Smooth finishing layer ready for paint

Smooth finishing layer ready for paint

Suitable for concrete, block and cementitious plaster bases
Suitable for concrete, block and cementitious plaster bases

Suitable for concrete, block and cementitious plaster bases

Suitable for protected space
Suitable for protected space

Suitable for protected space

Manual and machine sprayed application
Manual and machine sprayed application

Manual and machine sprayed application

    • Application temperature: 5°C - 35°C
    • Specific gravity of powder: 1.1 kg. per litre 
    • Typical consumption: 1.1 kg. per sq.m. for a thickness of 1 mm.
    • Work usability duration: up to an hour, depending on temperature
    • Capillary absorption coefficient: K < 0.4 kg/ m²h¹ᐟ²
    • Compressive strength following 28 days: in excess of 5 MPa
    • Tensile bond strength following 28 days: in excess of 0.4 MPa
    • Holds Green Standard Label
    • Meets SI 1920 requirements for cementitious plaster
    • Meets SI 1414 requirements for thermal plaster system
    • Meets SI 5075 requirements for plaster in protected spaces

    Powder: cement, graded aggregate, polymers and powdered additives

    • For smoothing walls and concrete ceilings, concrete, cellular, and pumice blocks 
    • Completed smooth finishing layer in white or grey ready for painting
    • Used as a finishing layer for cementitioius plaster
    • For application as a finishing layer in protected spaces
    • For interior and exterior application
    • For manual application and by spraying with plastering machine
    • For application to a thickness of up to 4 mm. in two layers 
    • Ready for use after addition of water
    • The company's warranty is limited solely to the nature and quality of the products and is no substitute for the user's reponsibility; the user is required to check the suitability of the product for the required application. 
    • We reserve the right to update or modify the data and recommendations without prior notice.
    • In any event, this document is not such as to approve or recommend any deviation or aberration from the regulations and laws of the State of Israel, in particular the  Planning and Building Law, 5725-1965, and Standards issued by the Standards Institute of Israel. 
    • Likewise, this document is no substitute for perusal of the aforesaid law and regulations, nor does it constitute a reference for them.
    BG 505 stucco finishing plaster Image