BG 405 Durabond tile adhesive

Finishing Products

Tile Adhesives

Improved acrylic adhesive for porcelain, ceramic and mosaic tile cladding 

BG 405 Durabond tile adhesive Image
For interior use and wet rooms
For interior use and wet rooms

For interior use and wet rooms

Specially designed for "slimmed down" and large tiles
Specially designed for "slimmed down" and large tiles

Specially designed for "slimmed down" and large tiles

Suitable for tiles with an absorption level of above 10%
Suitable for tiles with an absorption level of above 10%

Suitable for tiles with an absorption level of above 10%

    • Application temperature: 10°C - 35°C
    • Typical consumption: 1.45 kg. per sq.m. for a thickness of 1 mm.
    • D2 - tensile bond strength after 28 days: in excess of 1 MPa
    • S1 - lateral strain (flexibility): 2.5 - 5 mm.
    • T - reduced slip: slip of up to 0.5 mm.
    • Initial shear bond strength: equal to or greater than 1 MPa
    • Shear bond strength following immersion in water: equal to or greater than 1 MPa
    • Bears SI 4004 Mark for D2T designation
    • Has received verified EPD report
    • Meets SI 1555 requirements 

    Paste: water, acrylic polymer and additives

    • For affixing porcelain, ceramic and mosaic tiles
    • For application on concrete bases, plastered concrete blocks, cellular blocks with cementitious plaster, waterproof gypsum boards, gypsum blocks
    • Especially suitable for tiles with an absorption level of above 10%
    • Suitable for tiles less than 5 mm. thick ("slimmed down")
    • For interior application and wet rooms
    • Thickness of cladding adhesive layer: 3 - 7 mm.
    • Not intended for exterior flooring and use
    • Ready for use 
    • The company's warranty is limited solely to the nature and quality of the products and is no substitute for the user's responsibility; the user is required to check the suitability of the product for the required application. 
    • We reserve the right to update or modify the data and recommendations without prior notice.
    • In any event, this document is not such as to approve or recommend any deviation or aberration from the regulations and laws of the State of Israel, in particular the  Planning and Building Law, 5725-1965, and Standards issued by the Standards Institute of Israel. 
    • Likewise, this document is no substitute for perusal of the aforesaid law and regulations, nor does it constitute a reference for them.
    BG 405 Durabond tile adhesive Image