BG 405 Durabond tile adhesive

Finishing Products

Tile Adhesives

Acrylic adhesive for porcelain, ceramic and mosaic tile cladding

Application temperature: 5°C - 35°C
Typical consumption: 1.45 kg. per sq.m. for a thickness of 1 mm.
D1 - acrylic emulsion adhesive: tensile bond strength after 28 days in excess of 0.5 MPa
T - reduced slip: slip of up to 0.5 mm.
Initial shear bond strength: equal to or greater than 1 MPa
Shear bond strength following immersion in water: equal to or greater than 1 MPa
Tensile bond strength following 7 days in air and 21 days' immersion in water: in excess of 0.5 MPa
Meets SI 4004 requirements for D1T designation
Meets SI 1555 requirements fior cladding
Has received verified EPD report

Paste: water, acrylic polymer and additives

For affixing porcelain, ceramic and mosaic tiles
For application on concrete bases, concrete and cellular blocks with cementitious plaster, waterproof gypsum boards and gypsum blocks
Suitable for tiles with absorbence above 10%
Suitable for tiles with a thickness below 5 mm. ("slimmed down")
For interior and wet room application
Thickness of cladding adhesive layer: 3 - 7 mm.
Not intended for wet rooms, flooring and exterior use
Ready for use

The company's warranty is limited solely to the nature and quality of the products and is no substitute for the user's reponsibility; the user is required to check the suitability of the product for the required application.
We reserve the right to update or modify the data and recommendations without prior notice.
In any event, this document is not such as to approve or recommend any deviation or aberration from the regulations and laws of the State of Israel, in particular the Planning and Building Law, 5725-1965, and Standards issued by the Standards Institute of Israel.
Likewise, this document is no substitute for perusal of the aforesaid law and regulations, nor does it constitute a reference for them.