BG 30 tile adhesive

Finishing Products

Tile Adhesives

Improved cementitious adhesive for porcelain, ceramic and mosaic tile cladding and flooring

For interior and exterior use

Properties

Application temperature: 5°C - 35°C
Typical consumption: 1.45 kg. per sq.m. for a thickness of 1 mm.
C2 - improved cementitious adhesive: tensile bond strength after 28 days in excess of 1 MPa
T - reduced slip: slip of up to 0.5 mm.
Open time: 30 min.
Work usability duration: up to an hour
Tensile bond strength following 7 days in air and 21 days' immersion in water: in excess of 1 MPa
Tensile bond strength following 14 days in air and 14 days held in an oven: in excess of 1 MPa
Bears SI 4004 Mark for C2TE designation
Bears Green Standard Mark
Meets SI 1555 requirements

Ingredients

Powder: cement, graded aggregate, polymers and powdered additives

Advantages

For affixing porcelain, ceramic and mosaic tiles with an absorption level of below 10%
For application on concrete bases, concrete blocks and cellular blocks with cementitious plaster
Suitable for interior cladding and interior and exterior flooring
Thickness of cladding adhesive layer: 3 - 10 mm.
Thickness of ceramic flooring adhesive layer: 5 - 15 mm.
Ready for use following addition of water

Safety Guidelines

The company's warranty is limited solely to the nature and quality of the products and is no substitute for the user's reponsibility; the user is required to check the suitability of the product for the required application.
We reserve the right to update or modify the data and recommendations without prior notice.
In any event, this document is not such as to approve or recommend any deviation or aberration from the regulations and laws of the State of Israel, in particular the Planning and Building Law, 5725-1965, and Standards issued by the Standards Institute of Israel.
Likewise, this document is no substitute for perusal of the aforesaid law and regulations, nor does it constitute a reference for them.