BG 272 Rediflex bituminous sealant

Waterproofing Solutions

Bituminous Waterproofing

Water-based single component bituminous sealant

BG 272 Rediflex bituminous sealant Image
Flexible, bridges fissures
Flexible, bridges fissures

Flexible, bridges fissures

Withstands stagnant water
Withstands stagnant water

Withstands stagnant water

Ready for use
Ready for use

Ready for use

Sealing of foundations, basements, wet rooms, balconies etc.
Sealing of foundations, basements, wet rooms, balconies etc.

Sealing of foundations, basements, wet rooms, balconies etc.

    • Application temperature: 5°C - 40°C
    • Temperature resistance: 0°C - 90°C
    • Specific gravity: 1.3 kg. per litre
    • Typical consumption: 1.5-2 kg. per sq.m. for single layer
    • Crust formation time: 50 - 90 min.
    • Drying time between layers: 6 - 12 hrs. 
    • Drying time for contact with water: 24 - 48 hrs.
    • Final drying time: 72 hrs.
    • Elongation at break (ASTM D412): ≥ 650%
    • Bonding strength to concrete (ASTM D903):  ≥  1 N/mm.
    • Breaking strength (ASTM D412):  ≥  10 N/mm.
    • Tensile strength (ASTM D412):  ≥  2 MPa
    • Puncture strength: 280 N
    • Shore hardness: A 60 - 70
    • Hydrostatic pressure resistance under DIN 16726: 3 bar (30 m. water column)
    • Bonding strength to concrete with primer: 1.7 MPa

    Paste: bitumen, polyurethane and polymer

    • For sealing concrete surfaces below flooring on wet room and hung balcony floors
    • For sealing underground surfaces such as basement walls, retaining walls, foundation beams, raft sides etc.
    • High stretchability and mechanical resilience
    • High resistance to stagnant water
    • Withstands detergents, sulphates and sea water
    • Especially fast drying
    • Bridges fissures
    • High bonding ability to surface, even without primer
    • Blocks passage of radon gas
    • Applied by brushing or spraying 
    • Ready for use with no need for heating 
    • The company's warranty is limited solely to the nature and quality of the products and is no substitute for the user's reponsibility; the user is required to check the suitability of the product for the required application. 
    • We reserve the right to update or modify the data and recommendations without prior notice.
    • In any event, this document is not such as to approve or recommend any deviation or aberration from the regulations and laws of the State of Israel, in particular the  Planning and Building Law, 5725-1965, and Standards issued by the Standards Institute of Israel. 
    • Likewise, this document is no substitute for perusal of the aforesaid law and regulations, nor does it constitute a reference for them.
    BG 272 Rediflex bituminous sealant Image