BG 162 Flex Seal cementitious sealant Component A
Waterproofing Solutions
Cementitious Waterproofing
Dual component polymeric cementitious sealant powder
Primer for flooring over existing flooring
Withstands positive and negative water pressure
High flexibility, bridges fissures
Sealing of balconies, wet rooms, water reservoirs and swimming pools
Properties
- Application temperature: 5°C - 35°C
- Specific gravity of powder: 1.5 kg. per litre
- Typical consumption: 1.5 kg. per sq.m. in a single layer
- Work usability duration: about an hour
- Drying time between layers: 3 - 12 hrs.
- Final drying time: 28 hrs.
- Bonding ability to concrete following acclimatisation in air: greater than 0.5 MPa
- Bonding ability to concrete following 7 days' acclimatisation in air and 21 days in water: greater than 0.5 MPa
- Bonding ability to concrete following 14 days' acclimatisation in air and 14 days in oven: greater than 0.5 MPa
- Water penetration under pressue of 1.5 atm for 7 days: no water seepage
- Elongation at break under ASTM 3500: in excess of 45%
- Fissure bridging: equal to or greater than 0.75 mm.
- EPD VERIFIED
- Tested and found compliant with SI 6422 requirements for waterproof pastes
Ingredients
Powder: cement, graded aggregate, polymers and powdered additives
Advantages
- For sealing wet room floors and walls, balconies, above- and below-ground foundations, plant beds, planter boxes, swimming pools, water reservoirs and channels
- For sealing walls clad in stone by the dry and wet fixing and Baranovich methods etc.
- Used as primer for flooring over existing flooring and flooring over metal and wood
- Used as primer over concrete surfaces before applying BG Coat
- Suitable for application over cementitious plaster, concrete and gypsum boards
- Suitable for interior and exterior application
- Flexible, bridges fissures
- High bonding ability
- Withstands positive and negative water pressure
- Applied by brushing or spraying
- Ready for use by mixing two components A and B
Safety Guidelines
- The company's warranty is limited solely to the nature and quality of the products and is no substitute for the user's reponsibility; the user is required to check the suitability of the product for the required application.
- We reserve the right to update or modify the data and recommendations without prior notice.
- In any event, this document is not such as to approve or recommend any deviation or aberration from the regulations and laws of the State of Israel, in particular the Planning and Building Law, 5725-1965, and Standards issued by the Standards Institute of Israel.
- Likewise, this document is no substitute for perusal of the aforesaid law and regulations, nor does it constitute a reference for them.